| Waterproof Canopy |
|
$250.00 |
| Data Plate
|
|
$3.97 |
| Decal "EXPERIMENTAL"
|
2 Experimental decals
with 2" letters |
$4.25 |
| Decal Passenger warning
|
Red on white. This
placard needs to be displayed on the panel of all amateur built aircraft. |
$2.40 |
| Log Book
|
Airframe or Power
plant |
$5.50 |
| |
| Door
Parts |
| Gas spring
|
|
$19.00 |
| Gas spring ball and clip
|
|
$1.00 |
| Key Lock Assembly
|
|
$3.50 |
| Trimlock Door Seal
|
2 piece door seal |
$1.04 |
| |
| XL
Upgrades |
| Cut Down Keel-
Used to give back seat passengers a little more room. The cut down keel is
a necessity if you wish to install a bench seat. |
$380 |
| Bench Seat/Cut
down keel-Bench seat allows for seating of 3 children. The
60/40 split of the seat back allows for versatility when loading cargo.
The seat backs can fold completely down to allow for maximum cargo space. |
$1000 |
| XL-5 retrofit
kit - This complete upgrade includes the bench seat/cut down
keel, toe brake upgrade, Cleveland brakes, and carbon fiber for
reinforcing the stock XL gear legs. |
$3350 |
| |
| Toe
Brakes
|
| Inter connected toe
brake system allows full rudder deflection in a crosswind condition
without having to engage the brakes. |
$1300 - only
available as upgrade on old kits. Standard on all new kits.
|
| |
| Pitot Kit
|
Includes Pitot tube,
Static port, line fittings and Streamlined tubing |
Call For Prices |
| |
| Tubing |
| 1/4" 5052 aluminum |
used in RG system |
$00.48/ft |
| 3/8" 3003 aluminum |
used for fuel lines |
$00.67/ft |
| 1/2" 3003 aluminum |
used for oil lines |
$00.95/ft |
| 1/2" heat shrink tubing |
used over oil lines |
$00.45/ft |
| Replacement sight tubing |
used for fuel sight
tubes 18" piece |
$01.25 |
| 3/16" Nylaflow tubing |
Used for rudder and
brake lines |
$0.18/ft |
| |
| Oil door latch
kit 
|
Includes latch, 4"
piece of piano hinge and 8 1/8" countersunk rivets. |
$25.00 |
| |
| T-handle Heater Cable
|
|
$18.00 |
